Individual 2 link pieces are at the bottom of the page.
The DHP basic 2 link kit comes with the following:
(2) 2 link bars, made from 2"x2"x.250" square tube.
(4)
Energy Suspension Graphite impregnated polyurethane bushings #2004
(2) .750"x.5625" inner sleeves made from DOM tube.
(2) grade 8-9/16" bolts for mounting to frame.
(2) U bolt plates made from .250" AR500 or AR508 armor plate.
(4) U bolts, grade 8
(8) flat washers, grade 8
(8) lockwashers, grade 8
(8) nuts, grade 8
You can add round bag plates to this for bag over bar setups. The braces that weld onto the bars and hold the bag plates are also available from DHP on the tabs page coming soon. Check back for details.
Heres some pics of the parts that make up a DHP 2 link.
This is the 2"x2"x.250" tube with the 2"x.250" wall DOM ends welded on. This square tube bar is notched with a tube notcher for a great fit and beveled for a penetrating weld. I can also make these with the square tube on a diamond shape.
This is the end that mounts to the axle on your truck. Its angled for a better look and capped off to keep water and dirt out. These are finish sanded and primered then painted with a gray hammered paint. You can order these bare or just in primer.
This is the DOM end tube. These are the exact length needed and turned on a Lathe then measured with a digital caliper for an accurate tight fit. If you order this for a certain truck the width of this front bushing will be an exact fit. Otherwise it will be 2.50" wide and with the poly bushings the width is 3.00"
This is the U bolt plate made from AR500 or AR508 armor plate. Its one piece you wont ever have to worry about bending.
This is the U bolt and perch set that comes with the basic 2 link. These are from the racecar shop and are top quality.
You can also add tabs for mounting this to something other than the stock spring mounts. You can also add other tabs for shocks or a tube style shock mount. The shock mounts page is coming soon.
(2"x.250" round tube available soon)
This setup works well with either a watts link or a panhard bar. Either of these options is available from DHP. You can get a deal when you buy a 2, 3, 4, 5 or 6 link from DHP and add a panhard bar or watts link. Email me for details.
__________________________________________________
DHP 2 link pieces
2 Link parts now available seperately. Here are the parts for the DHP 2 link. I will add more to these as I get examples and new pieces ready.
DHP bars only kit
This bars only kit comes with 2 bars, 4 poly bushings, 2 inner sleeves, 2 bolts, 2 stover all steel locknuts and 4 washers.
DHP 2 link bar, part no 2LKGM02
__________________________________________________
2 link bag plate kit. $10 plus shipping.
This kit is for adding bags to your 2 link bars. These are lower bag plates only. We do not sell upper bag mounts yet. This kit comes with the following: 2 bag circles in your choice of diameters 6", 7" or 8", 4 square tube bag plate risers in your choice of centered or offset. Shipping is $4. Check out the pics below to help you decide.
This is a 3/16" thick bag circle with no holes.
6 inch
7 inch
8 inch
__________________________________________________
Bag plate risers $3 each
This is the centered bag plate riser. It fits over the 2" square tube and welds to the bag plate. Shipping is $1 per each piece.
__________________________________________________
This is the offset bag plate riser. It also fits the square tube and welds to the bag plate. Use this offset plate if your 2 link bars are close to your frame.
__________________________________________________
DHP 2 link bushing sleeve kit. This comes with the outer and inner bushing sleeves. The large is 2" O.D. DOM tube with a 1/4" wall. The poly bushings are Energy Suspension graphite impregnated polyurethane. The inner sleeves are 3/4" DOM tube with a wall thickness depending on the bolt size you will be using. The available tube lengths are 2&1/2", 3", 3&1/2" and custom sizes are available. Bolt sizes are 1/2", 9/16", 5/8" and are grade 8 and also come with all steel stover locknuts. Look for updates to this page soon.
