*** Update 08/08/08 ***

I am developing the newest version of these parts right now. I have decided to make 2 versions of these parts. The first is the original style version updated within the last week to use the stock balljoints and lay 20s on stock spindles. If you buy these parts they will not come with balljoints. I cannot buy them at a good enough price to include them. The pricing is below for this version. Look for the new page as soon as I finish a prototype.

***These parts eliminate strut rods**

How? by using the round bar between the bushings. This bar has a nut inside and replaces the bolt and nut used to hold the stock arms inside the frame. The 6" long 1&1/2" diameter tube then welds onto the frame and holds the smaller bushing on the ends and therefore eliminating the strut rods.

***These parts require welding.***

Where? only the 1&1/2" diameter tube to the frame. You can choose to leave this not welded and have the bolt hold the entire thing. I reccomend welding the tube onto the frame.

81-87 Isuzu upper and lower control arm set. $425

Includes all 4 arms, polyurethane bushings, upper and lower crossbars, shock tabs and grade 8 hardware.

81-87 Isuzu upper control arm set. $175

Includes polyurethane bushings, crossbars and grade 8 hardware. Fits the factory bolt on balljoints. Made with 1" DOM tube with a 1/4" wall. upper balljoint plates are 1/4" thick.

81-87 Isuzu lower control arm set. $250

Includes polyurethane bushings and grade 8 hardware. These are A shaped arms with a bag plate on the bars. Made with 1" DOM tube with a 1/4" wall. balljoint plates are 1/2" thick, bag plates are 3/16" thick. comes with lower crossbars to eliminate the strut rods.