*** Update 10/28/09***

The latest DHP upper and lower control arms for the 88-95 Isuzu pup are now available.

Production versions are now available

Link to install pics below each pic

***These parts eliminate strut rods**

How? by using the round bar between the bushings. This bar has a nut inside and replaces the bolt and nut used to hold the stock arms inside the frame. The 6" long 1&1/2" diameter tube then welds onto the frame and holds the smaller bushing on the ends and therefore eliminating the strut rods.

***These parts require welding.***

Where? only the 1&1/2" diameter tube to the frame. You can choose to leave this not welded and have the bolt hold the entire thing. I would recommend welding the tube onto the frame. There is also a brace included in the lower set.

88-95 Isuzu pup upper and lower control arm set $458

Comes with all 4 tube arms, Energy Suspension poly bushings, upper screw in balljoints, upper crossbars, lower crossbars, shock tabs, braces and all grade 8 hardware for installation.

__________________________________________________

88-95 Isuzu pup upper control arm set. $219

Includes Energy Suspension graphite impregnated polyurethane bushings, balljoints, crossbars and all hardware for installation. Uppers made with 1"x.125" wall DOM tube.

This is what you get with this upper arm set.

Isuzu uppers install pics

__________________________________________________

88-95 Isuzu lower control arm set. $239

Includes lower crossbars, braces, Energy Suspension graphite impregnated polyurethane bushings and all grade 8 hardware for installation.

Isuzu lowers install pics