This is the all new DHP Colorado/Canyon upper and lower control arm set. These come in a few different versions. The uppers are available for use with factory balljoints or made for GM fullsize balljoints (K6292). The uppers are also available in an adjustable version.

__________________________________________________

GM 355 UPPER AND LOWER CONTROL ARM SET $499 shipped **

This set includes all 4 arms, poly bushings and all hardware for installation. This set does not include balljoints. This set is used with factory balljoints. The uppers are fixed length and made with 1"x.156" wall DOM tube. The lowers are made with 1.250"x.188" wall DOM tube. The balljoint plates are .250" thick HR plate. There is drop built into the lowers. The upper and lower balljoint angles are angled for maximum travel when used on dropped trucks with large wheels. The uppers are 1/4" longer than stock for laying large wheels and still having adjustment for alignment. This is not a 100% accurate length for all trucks. Its what works best with the most trucks. How well it works with yours depends on wheel and tire diameter and how low you normally drive as well as if you have a body drop and/or Zd frame. If you need an upper and lower set and would like the uppers to be adjustable please order the upper and lower sets seperately.

___________________________________

GM 355 UPPER CONTROL ARM SET (for factory balljoints) $199 shipped **

This Colorado/Canyon upper arm set comes with poly bushings and hardware for installation. The bushings are Energy Suspension graphite impregnated polyurethane. This set is designed for use with the factory balljoints. This set DOES NOT come with balljonts. The balljoint plates are .250" HR plate and are angled down to optimize the factory balljoint angle for lowered trucks on large wheels. These arms are 1/4" longer than stock to optimize adjustment for alignment and caster/camber.

___________________________________

GM 355 UPPER CONTROL ARM SET, ADJUSTABLE (for factory balljoints) $299 shipped **

This Colorado/Canyon upper set comes with adjustable poly bushing ends on 3/4"-16 thread studs with jam nuts. This set is 1/4" longer than stock with the ends screwed all the way in. The balljoint plates are .250" HR plate. These are just like the above set in every way except for being adjustable. This set DOES NOT come with balljoints.

___________________________________

GM 355 UPPER CONTROL ARM SET (with K6292 balljoints) $259 shipped **

This Colorado/Canyon upper set comes with K6292 balljoints which fit the 355 upper spindle hole and have a bit more travel and a smaller bolt pattern as well as a 0 degree static angle. This set is 1/4" longer than stock for better adjustment and alignment. The balljoint plates are .250" HR plate.

___________________________________

GM 355 UPPER CONTROL ARM SET, ADJUSTABLE (with K6292 balljoints) $359 shipped **

This Colorado/Canyon upper set comes with K6292 balljoints which fit the 355 upper spindle hole and have a bit more travel and a smaller bolt pattern as well as a 0 degree static angle. The poly bushing ends are on 3/4"-16 thread studs with jam nuts. This set is 1/2" longer than stock with the ends screwed all the way in for better adjustment and alignment. The balljoint plates are .250" HR plate.

___________________________________

GM 355 LOWER CONTROL ARM SET $299 shipped **

The Colorado/Canyon lower arm set comes with poly bushings and hardware for installation. The lower set has extra drop built in for laying large wheels. This set is designed for use with factory balljoints. This set DOES NOT come with balljoints. The balljoint plate angle is designed to give maximum travel for dropped trucks on large wheels. These will work with Belltech 2" drop balljoints.

___________________________________

** Shipping is for lower 48 states only. If you live outside the continental U.S. please email me for a shipping quote on any item.

If you have any questions or comments, please email me at

Mike@Dallashotrodparts.com

Thanks, Michael White, Dallashotrodparts.com