|
*** Dallas Hotrod Parts ***
*** Update 07/24/09 ***
This is the latest DHP version of the 1998-2010 Ranger transmission crossmember. This is a raised crossmember for trucks that lay frame. This tube version crossmember clears the exhaust and requires no cutting or welding to install. This part bolts into the C groove in the Ranger frame and installs in about 15 minutes. This part also bolts into existing holes in the Ranger frame. Theres a tech article on installing this part on the Tech page.
The center plate and both end plates are now made with 1/4" thick AR500 armor steel plate.
This new flat plate version 5 is $99 plus shipping of $19 to anywhere in the continental US.
I keep at least 2 of each of these in stock at all times.
__________________________________________________
98-09 Ranger/Mazda B series transmission crossmember version 2
Includes crossmember and grade 8 hardware. This crossmember is made with 1"x2"x1/8" wall rectangle tube. The end plates, center plate and braces are all 1/4" AR500 armor steel plate. Look for new pics of all versions of this part very soon.
Slides into the "C" groove in the Ranger frame.
Bolts in using existing holes in the Ranger frame.
This version has a new lower price of $89 plus $19 shipping to anywhere in the continental US.
__________________________________________________
98-09 Ranger/Mazda B series transmission crossmember version 4
Raised trans plate version for trucks with a frame Z. This version raises the trans plate 2" This version requires the floor of your Ranger to be raised a bit to clear the transmission. If you already have your frame Zd then you already have the floor modified anyway. This version will now go into production and I will keep at least 2 in stock at all times. If you need a custom height on one of these please email me and I can get it out in about 1 to 2 days. The price is the same as whatever version you want, flat plate or tube.
*** available in flat plate or tube version ***
Includes crossmember and grade 8 hardware including (2) 1/2" bolts, (2) stover all steel locknuts and (2) flat washers. This crossmember is made with 1"x2"x1/8" wall rectangle tube. The end plates, center plate and braces are all 1/4" HR steel. Look for new pics of all versions of this part very soon.
Slides into the "C" groove in the Ranger frame.
Bolts in using existing holes in the Ranger frame.
__________________________________________________
Look for our I beam Ranger engine crossmember/tube arm setup soon! This will replace the I beam setup with a slide in crossmember that bolts into existing holes. This will eliminate the I beams and will bolt on Tube arms for bags. This will use the stock steering box and drag links. look for a page for this product soon.
| 
