Dual Heim Joint Panhard Bar kit, regular

$89 shipped **

This is the all new DHP dual heim joint panhard bar kit. This will allow you to run a parallel 4 link, or 2 link and keep your axle in the center. These should be ordered as long as possible. The longer the bar the bigger the arc the axle moves in.

This kit comes with a main bar thats any length you want from 24 to 36" in one inch incriments. This kit has heim joints at both ends, one left hand thread and one right hand thread with jam nuts. This means the length can be adjusted without removing the bar. You simply loosen the jam nuts and turn the bar until you have it where you want. Then lock down the jam nuts again.

Please include the length you need from the center of the hole in one heim to the center of the hole in the other heim.

The kit comes with brackets for both ends, heim joints, cone washers and grade 8 hardware.

** Continental U.S. ONLY

For Alaska, Hawaii or international orders, please email me at Mike@dallashotrodparts.com for a shipping quote. You will be asked for an address so I can get a quote from USPS.

If you have any questions or comments, please email me at

Mike@Dallashotrodparts.com

Thanks, Michael White, Dallashotrodparts.com