Dallas Hotrod Parts products will be along the lines of air ride parts, control arms, 4 links, watts links etc. These will include the following:

73-87 GM fullsize dropped crossmember setup

This is an item I am currently working on. I have a steering rack, a front frame clip and Im in the development stages of this product. This setup will be made for use with a 79-93 Mustang steering rack, fit stock or tube arms and come with steering rod ends for the GM spindles, upper arm mounts, engine mounts and grade 8 hardware for installation.

Ranger I beam to tube arms bolt on setup

This will be a setup that eliminates the I beams. This will have a crossmember that bolts into an I beam Ranger frame and take place of the stock frame crossmember. This will have tube arms for bags and use the stock steering box and spindles or use a rack and some other readily available spindles. The parts I provide will be the crossmsmber that bolts in, and a set of arms. I will also include instructions on everything you need to finish the job. Right now Im leaning toward Mustang II spindles and a Mustang II rack.

82-04 S-10 offset upper and lower arms

This is an arm set I used to sell at BYC that has the balljoints pushed forward 3/4" to allow for more clearance with the firewheel and also lets the wheel set closer into the center of the wheel opening.

82-04 S-10 transmission crossmember

This will be a tube version or a plate version thats adjustable and has clearance for exhaust.

82-04 S-10 gas tank raised crossmembers

97-03 F series upper and lower arms

65-96 F series I beam to tube arms bolt on setup

Colorado upper and lower arms

Colorado transmission crossmember

Colorado gas tank crossmember

Colorado driveline crossmember

Laser cut brackets and tabs

If you have any questions or comments, please email me at

Mike@Dallashotrodparts.com

Thanks, Michael White, Dallashotrodparts.com