This is the all new DHP Mitsubishi Mighty Max pickup upper and lower control arm set. This set eliminates the strut rods and has bag plates and balljoint angles for dropped and bagged trucks. The pics of the lowers below are of the all new 2010 design. Look for new pics soon.

I have recieved install pics from customers and posted them in a tech article. Look for the avatar and link below each set.

Mitsubishi Mighty Max upper and lower set $550 plus shipping ($36)

This set includes upper and lower arms, screw in/press in balljoints, upper and lower crossbars, Lower bolt adapter plates, Energy Suspension graphite impregnated polyurethane bushings and all hardware for installation. The uppers are made with 1"x.156" wall DOM tube. The lowers are made with 1"x.250" wall DOM tube. The bag plates are .125" thick AR500 armor plate. The balljoint angles are 0 degrees for great balljoint angles when layed out and raised up. As with any DHP arms these are available 1" shorter than stock for more turning when layed out.

______________________________

Mitsubishi Mighty Max upper set $250 plus shipping ($18)

This set includes the upper arms, screw in/press in balljoints, crossbars, poly bushings and all hardware for installation. These are also available adjustable with heim joints or poly bushings on the arms.

Mitsubishi uppers install pics

______________________________

Mitsubishi Mighty Max lower set $300 plus shipping ($22)

This set includes the lower arms, screw in/press in balljoints, crossbars, Lower bolt adapter plates, poly bushings and all hardware for installation. These are also available adjustable with heim joints or poly bushings on the arms.

Mitsubishi lowers install pics

______________________________

If you have any questions or comments, please email me at

Mike@Dallashotrodparts.com

Thanks, Michael White, Dallashotrodparts.com