Watts Link for minitruck with regular poly bushings and bolts.

$209 plus shipping

You can choose between 4 different center bars and several different center cranks.

The poly bushings are 1.750" O. D. DOM tube with Energy Suspension Graphite Impregnated polyurethane bushings #9002. They come with inner sleeves that are .750"(3/4") with a 1/2"(.500") hole.

The bolts are grade 8 and .500"(1/2") diameter. The tabs are .250" thick.

This watts link comes with the following:

1 center bar of your choice.

2 center crank plates of your choice.

8 tabs of your choice.

10 poly bushings.

5 inner sleeve.

2 crossbars with a bushing on one end.

2 bushing end sleeves with threaded studs

7 bolts.

7 all steel locknuts.

4 right hand thread jam nuts.

The choices of center bars are:

MTRG-CB01

___________________________________

MTRG-CB02

___________________________________

MTRG-CB03

___________________________________

MTRG-CB04

___________________________________

The choices of crank plates are:

MTRG-CP-01

___________________________________

MTRG-CP-02

___________________________________

MTRG-CP-03

___________________________________

MTRG-CP-04

___________________________________

MTRG-CP-05

___________________________________

MTRG-CP-06

___________________________________

The choices of tabs are:

MTRG-WT-01

___________________________________

MTRG-WT-02

___________________________________

MTRG-WT-03

___________________________________

MTRG-WT-04

___________________________________

Please add your choices of center bars, cranks and tabs in the box provided or email me seperately.

More designs will be added as they are cut and tested. We can also do custom designs and/or your own designs. If you can design your own please send them in a .dwg or .dxf file. I can also design pieces for you from drawings or sketches. If you design your own the bolt holes in the crank plates need to be 3" apart and 6" from top hole to bottom hole. Regular watts use 1/2" bolts and need 1/2" holes. You can also design your own tabs. Regular tabs also use 1/2" holes. You can email me for a quote on any crank plates or tabs.

If you have any questions or comments, please email me at

Mike@Dallashotrodparts.com

Thanks, Michael White, Dallashotrodparts.com