The watts links on this page mount to the gear cover of your trucks rear axle. We make them for the GM14 bolt, GM 12 bolt, GM 10 bolt, GM S-10 rearend, GM 355 rearend (Colorado/Canyon) and Ford Ranger rearend. We will be adding new styles as we build and test them. We can also do any other custom ones you may need. All come with the crossbars, jeim joints, Energy Suspension graphite impregnated polyurethane center bushing, grade 8 hardware with all steel locknuts and long tab brackets so they will fit any frame. We also stock parts for any watts link we sell.
These watts links can be mounted to the rear axle of your truck without removing the rear gear cover. You only need to remove 6 bolts. The bolts are 5/8" grade 8, the heim joints are Pro-1 series right hand and left hand threaded black powder coated and include jam nuts. This means you can adjust the axle side to side without removing any of the bars. You simply loosen the jam nuts, and turn both bars at the same time and your axle moves. when it is centered like you want it you simply tighten the jam nuts and your done. Any adjustments later are performed this same easy way.
*** NEEDS ONLY 5" CLEARANCE ***
Yes, that's right, all these DHP rear gear cover watts only needs 5" of clearance bewtween the center of the rearend cover and whatever you have behind it. You guys with SUVs that have a fuel tank behind the axle can use this product. You guys running air tanks or valves back there can also use this product.